Dryness in Paradise: On Humidors in Spring Training

Spring-training games in the Cactus League are a unique joy, especially for baseball fans (like me) who hail from colder climes. Unlike the Grapefruit League, which features stadiums separated by hundreds of miles of humid Florida air, the Cactus League consists of a compact cluster of stadiums bathed in sunshine and desert-dry air. Spectators and players alike can enjoy the spring conditions (and for some, including myself and Carson Cistulli, Barrio Queen guacamole and sangria) in the Valley of the Sun for weeks before teams return to their home stadiums across the country in late March.

Figure 0: Your author enjoying the 82-degree sunshine (and probably a juicy IPA, not pictured) at Hohokam Stadium, March 2017

Some teams will return to relatively warm and dry climates (Arizona Diamondbacks, who have to trudge the 20 freeway miles to Chase Park), but others will return to retractable domes (Seattle Mariners) or cold conditions where snowed-out games are certainly not out of the question (Cleveland). Given that the point of spring training is to get players ready for 81 games at their home ballpark, are two months of baseball in dry, sunny paradise the best way to prepare players for opening day at home? Short of building exact climate-controlled replicas of Kauffman Stadium and Wrigley Field in the Phoenix Metro, how could teams better prepare their players for the start of the season at their own home ballpark? Enter an unlikely hero, the great “Rocky Mountain equalizer”: the humidor.

Figure 1: Climatology of Phoenix, AZ (Feb-Mar) and the home locations (ICAO Airport codes) of the 15 Cactus League teams (Apr-May)

Just by eyeballing the graphs in Figure 1, without wading into the different lines and the specific airports (some lines switch to larger airports with RH), no stadium’s meteorological conditions are close to those in the Phoenix area. With the exception of the Rangers, no team plays in a stadium with an average May high temperature greater than the average March high temperature in Arizona. And only the “high desert” of Colorado comes close in RH to the dry air in Arizona March. Clearly, the opening day meteorological conditions will be significantly different from those Cactus League players see during spring training (Figure 2).

Figure 2: Changes in climate between April (major airport nearest home stadium) and March (PHX), with larger markers indicating larger temperature differences (dotted markers indicate increased T) and blue markers indicating more humid conditions (orange being drier)

This drastic change in temperature and humidity (Figure 2) is likely to have a major impact on how the ball plays once teams leave Arizona. Like many baseball physics researchers before me, I will once again heavily rely on the work previously done by Dr. Alan Nathan to inform my physical exploration herein. As shown in Nathan, et al. (2011), the two crucial meteorological factors of temperature (T) and relative humidity (RH) have a strong impact on both aerodynamic factors (such as drag) AND contact factors (such as coefficient of restitution, COR) that determine how far a batted ball travels. Rather than run afoul of the copyright of the American Journal of Physics by reproducing the figures here, I highly encourage you to check out Figures 2-4 in Nathan, et al. (2011) to see these relationships.

Equation Block 1: Calculating the effect of COR changes on “effective” exit velocity of a batted ball

The eternally relevant Baseball Trajectory Calculator developed by Alan Nathan has the ability to adjust aerodynamic factors associated with stadium altitude, barometric pressure, temperature, and relative humidity. Combined with the equations from Block 1 above, the changes in COR as a result of meteorological changes can be simply approximated in the Nathan Calculator as a manual change in the rebound (exit) velocity of the ball off the bat.

Great, simply smash aerodynamic and COR changes together and we’re in business, right? Well, almost…it seems every baseball physics article could have all the baseball-specific details stripped out and what would remain is a meditation on linearity and covariance. This example is no different. While we might expect meteorologically-induced aerodynamic and contact factors to vary independently, in real on-the-field situations, balls will be affected by not only their current conditions but also their recent history of past conditions. Absent experimental data on the time scale of such internal ball changes, we can still get a general sense of what could happen when multiple changes overlap. Let’s dive into some colorful 3-D contour plots of results using the default batted ball parameters of the Trajectory Calculator (100 mph pitch, 100 mph exit velocity, 30 degree launch angle) and see what happens!

Figure 3: Effects of meteorological T and RH on fly ball distance, including COR effects equal to ambient conditions (as if balls were kept in the same conditions)

 

We aren’t too far afield from the basic variables one can change in the Nathan Calculator, so the results from Figure 3 aren’t terribly surprising. Baseballs travel further through warm and dry air. In addition, dry/warm baseballs are bouncier than cold/wet baseballs. It’s unlikely that equipment managers are keeping baseballs outside, so they probably aren’t going to actually experience changes in COR associated with extreme conditions due to the time necessary for water vapor to diffuse into the guts of the baseballs and soften them. But absent a sense of how equipment managers store baseballs, let’s explore the possible impact that a spring training humidor could have.

Figure 4: Effects of humidor-like T and RH on fly-ball distance, with aerodynamic effects equal to PHX March average but COR changing with humidor conditions

Figure 4 shows what would happen if we changed the internal ball T and RH but continued to play in the average Phoenix-area meteorological conditions in March. The weakness of the temperature effect compared to the strength of the humidity effect can be predicted with the slope of each experiment in Nathan, et al. (2011). It’s unlikely, though, that T and RH both have, when combined, a linear effect on COR. For example, it’s unclear whether this linear model captures the hot/wet and cold/dry combinations correctly. This indicates the need to inspect the covarying relationship between T and RH on COR (and therefore, fly-ball distance) more deeply than the simple linear combination I used in this model.

Table 1: Monthly climate, elevation, default fly ball distance using the Nathan Calculator and monthly climate, and scale factors for conversion of March fly ball distance (at PHX) to April fly ball distance (at home).

With the data from Figures 3-4, we can figure out an appropriate scaling factor (Table 1) to translate the dimensions of each team’s spring training stadium and compare them to the dimensions of their home stadium (Figure 5).

Figure 5: Surprise Stadium (KC) and Scottsdale Stadium (SF) scaled to April climatology in KC and SF (no humidor)

After comparing the “effective dimensions” of the Cactus League stadiums to the home stadiums of each team, one can’t help but wonder if the teams had a hand in the way the stadiums in Arizona were constructed. Some teams, such as the Royals, share a stadium with another team (Texas Rangers); therefore, this clearly can’t explain all of the similarities between stadium shapes.

Figure 5 shows that in Arizona during the month of March, the spring training stadiums play much “smaller” compared to other stadiums than their physical dimensions might indicate. By slightly lowering the COR of the ball by using a humidor, teams could cause their spring training stadiums to play with effective dimensions approximately equal to those of their home stadiums. If the Royals were to store their spring training baseballs in a humidor at approximately 70% RH, the differences between the distance up the lines (longer at Surprise than Kauffman) and the distance to straightaway center (shorter at Surprise than Kauffman) would yield around the same “effective surface area” of the scaled outfield.

This analysis, much like my earlier piece on fly-ball precession, neglects many physical variables that would impact the actual games being played. In this example, I have neglected the effects of wind and day-to-day changes in barometric pressure. Prevailing winds due to stadium orientation and location would make this experiment much more realistic. For variations in pressure due to synoptic weather systems (cold fronts, warm fronts, etc.), however, “averages” over an entire month inform us less in terms of the baseline environments of each stadium than monthly averages of temperature and relative humidity. The model also assumes that the balls are essentially stored in temperatures and humidities equal to the ambient conditions in the home stadiums; equipment managers likely store them in some indoor location, but it’s unclear whether they are treated to the exquisite RH control seen with the humidor at Coors Field. Such confounding factors will be explored in future follow-ups to this piece.

In addition to physical assumptions made here, it’s quite possible that baseball operations departments in teams have goals in spring training other than closely approximating the hitting conditions in their home stadiums. But if they want to see who will have power that plays well in their home stadium, the humble humidor could play a key role in moderating the enhanced fly-ball distance that comes naturally with the warm, dry spring air of paradise (Cactus League baseball, that is).



Print This Post

Michael is a PhD Candidate in Atmospheric Science in the Department of Earth, Atmospheric, and Planetary Science (EAPS, Course 12) at MIT. Along with three other sports-inclined MIT friends, he co-founded the baseball toolBOX (www.btoolbox.org) research venture, which aims to use analytical methods from fields such as atmospheric science and electrical engineering to discover actionable insights in baseball physics and mechanics. You can reach him with comments, questions, and juiced-ball conspiracy theories at michael@btoolbox.org

Comments are closed.